Bearing Station Logo
Call u son 0844 335 6153
Bearings

Branch Opening Hours Mon-Fri 8.00am - 5.00pm Sat & Sun Closed

Maintenance Tools

1 - 16 of 162
SKF Electric Hot Plate 230V

The SKF Electric Hot Plate 729659 C, is - professional heating device especially designed for pre-heating small bearings prior to mounting. The temperature of the plate can be adjusted at the turn of - knob to provide - temperature range of between 50 and 200 °C (120 and 390 °F).
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

Ref: 729659C-SKF
Brand: SKF
£1,207.22INC
VAT
SKF Bearing Heater 110V

The SKF small induction heater TIH 030m combines high heating capacity with portability. The compact lightweight design makes the TIH 030m portable. Placing the induction coil outside the heater's housing allows the heating of bearings weighing up to 40 kg (88 lb). The induction heater is equipped with thermal overheating protection to reduce the risk of damage to the induction coil and the electronics. In addition to temperature mode, the TIH 030m is equipped with - time mode for heating components other than bearings. The induction heating system is supplied standard with three yokes
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

Ref: TIH030M-110V-SKF
Brand: SKF
£3,317.41INC
VAT
SKF Bearing Heater 230V

The SKF small induction heater TIH 030m combines high heating capacity with portability. The compact lightweight design makes the TIH 030m portable. Placing the induction coil outside the heater's housing allows the heating of bearings weighing up to 40 kg (88 lb). The induction heater is equipped with thermal overheating protection to reduce the risk of damage to the induction coil and the electronics. In addition to temperature mode, the TIH 030m is equipped with - time mode for heating components other than bearings. The induction heating system is supplied standard with three yokes
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

Ref: TIH030M-230V-SKF
Brand: SKF
£3,317.41INC
VAT
SKF Bearing Heater 230V

The SKF medium induction heater TIH 100m has the same high

standards of efficiency and performance as the small heater

combined with increased capacity. The advanced design of the

power electronics allows features of accurate electric current

control, cut-outs to avoid overheating and controls on rate of

temperature increase.
Kit contents:
Thermometer with 1 x contact probe TMDT 2-30


3 x AAA batteries


1 x printed instructions for use
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

Ref: TIH100M-230V-SKF
Brand: SKF
£4,853.28INC
VAT
SKF Standard Jaw Puller, - Jaw, 65mm Grip

65mm capactity Versatile, high quality carbon steel bearing pullers from SKF, available in two of three jaw design. - simple and effective way to dismount small to medium bearings and components.

Cone system for automatic centring and secure positioning of arms

Strong springs keep arms apart for easy operation

Hardened, high quality carbon steel
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

Ref: TMMP2X65-SKF
Brand: SKF
£97.38INC
VAT
SKF Puller protection Blanket

Puller Protection Blanket TMM x 350 provides additional user safety during dismounting.

Main Features and Benefits:

Designed to offer additional user safety, while dismounting bearings or other components

After the puller has been positioned, the blanket is simply wrapped around the puller and application

The tough, transparent plastic allows the user to monitor the component and the puller during operation

Especially designed to fit SKF TMMA series pullers, they are also suitable for use in combination with many other pullers

PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

Ref: TMMX350-SKF
Brand: SKF
£100.19INC
VAT
SKF Standard Jaw Puller, - Jaw, 170mm Grip

170mm capactity Versatile, high quality carbon steel bearing pullers from SKF, available in two of three jaw design. - simple and effective way to dismount small to medium bearings and components.

Cone system for automatic centring and secure positioning of arms

Strong springs keep arms apart for easy operation

Hardened, high quality carbon steel
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

Ref: TMMP2X170-SKF
Brand: SKF
£185.54INC
VAT
SKF Standard Jaw Puller, - Jaw, 185mm Grip

185mm capactity Versatile, high quality carbon steel bearing pullers from SKF, available in two of three jaw design. - simple and effective way to dismount small to medium bearings and components.

Cone system for automatic centring and secure positioning of arms

Strong springs keep arms apart for easy operation

Hardened, high quality carbon steel
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

Ref: TMMP3X185-SKF
Brand: SKF
£232.27INC
VAT
SKF Jaw bearing puller, 60kN 36-150mm

Sturdy design allows dismounting of components even in the tightest

application in - safe manner

• The unique red rings spring-operated opening mechanism allows the

SKF EasyPull to be placed behind the component with one movement

of the hands

• Self-locking arms help prevent the risk of puller slipping under load

• Double Hexagonal heads allow easier application of withdrawal force

• Self-centring capability and nosepiece help avoid damage to shaft

• Efficient use of time due to quick dismounting


PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

Ref: TMMA60-SKF
Brand: SKF
£496.72INC
VAT
SKF Bearing Puller Set

TMIP 7-28 internal e x tractor set

Tool kit for removing roller bearings from the housing; fits to the outer ring

Based on spring-loaded pullers with - special slide hammer

E x tremely hard, chrome-plated steel; optimum service life

Pulling device creates - positive fit with the inner ring
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

Ref: TMIP7-28-SKF
Brand: SKF
£569.48INC
VAT
SKF Hydraulic Easy Pull Law Puller

Equipped with spring-operated arms and - solid design, SKF’s patented EasyPull is one of the most user-friendly and safe tools on the market. Ergonomically designed, the spring-operated arms enable the user to position the puller behind the component with just one movement.
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

Ref: TMMA75H-SKF
Brand: SKF
£1,079.00INC
VAT
SKF Blind bearing puller kit, 10-400mm

Suitable for use on blind housings and shaft applications

Removes bearings from shaft diameters 10-100mm

Arms range from 135mm to 170mm in length

Arm sizes 4, - and - are fitted with filling plates to accommodate - wide range of bearings

Puller arms are made from - single-piece laser-cut hardened steel for strength and longevity

Claws are designed to facilitate - precise fit in the raceway allowing the application of higher dismounting forces

Bearing Selection Chart included
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

Ref: TMMD100-SKF
Brand: SKF
£1,093.73INC
VAT
SKF Hydraulic Puller Set

The TMHC 110E is - combination kit consisting both of - jaw puller and - strong back puller. The jaw puller can grip components with an outside diameter of up to 160 mm (6.3 in). The strong back puller, which grips behind components where jaws cannot enter, can handle components with - Maximum shaft diameter of 100 mm (4 in). Maximum pulling force for both pullers are equivalent to 100 kN (11.2 US ton force)
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

Ref: TMHC110E-SKF
Brand: SKF
£1,310.62INC
VAT
Axial Lock Nut Socket SKF To Suit KM0

These TMFS0 SKF Axial Lock Nut Sockets are designed for safe and easy tightening and loosening of lock nuts.
They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves.
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

Ref: TMFS0-SKF
Brand: SKF
£101.38INC
VAT
Axial Lock Nut Socket SKF To Suit KM1

These TMFS1 SKF Axial Lock Nut Sockets are designed for safe and easy tightening and loosening of lock nuts.
They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves.
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

Ref: TMFS1-SKF
Brand: SKF
£101.38INC
VAT
Axial Lock Nut Socket SKF To Suit KM2

These TMFS2 SKF Axial Lock Nut Sockets are designed for safe and easy tightening and loosening of lock nuts.
They are used to secure and adjust bearings on tapered journals, adapter sleeves and withdrawal sleeves.
PLEASE NOTE: WEBSITE ORDERING IS CURRENTLY UNAVAILABLE. PLEASE SEND ALL ENQUIRIES TO SALES@BEARINGSTATION.CO.UK

Ref: TMFS2-SKF
Brand: SKF
£104.05INC
VAT
  • Page 1 of 11

Sign up for our Newsletter